Product Categories
Contact Us

Weimi Hardware Tech. Company


Address: 1F, Jiufa Technology Park, Jinfu West Road, Liaobu Town, Dongguan, China 523407


Tel: 86-769-81123370


Fax: 86-769-81123371


Phone: 86-15814312928


info@weimichina.com


sales@weimichina.com


sales02@weimichina.com

Home > News > Content
Stamping Parts Processing Plant How To Do A Safe Guarantee
Weimi Hardware Tech. Company | Updated: Sep 05, 2017

Stamping Parts processing plant how to do a safe guarantee
Safe production has always been a very important topic, Stamping Parts on how to do a good job of production safety is also a natural demand to talk about the schedule. Want to really ensure that the overall security in the end is to practice from what point of view to carefully end it, this practice has been a lot of people's attention, as long as you summed up to take into account these, everything is more Smoothly.
Stamping Parts processing machinery and equipment in the course of the work there is a certain security question, we can be targeted to the practice of security questions, all the questions are a certain understanding, which is to do this Pieces of the work of the most basic conditions. As a Stamping Parts processing plant, the real want to ensure their own safety, we need to do all aspects of progress.
In addition to the safety of the understanding is very important, Stamping Parts processing plants will also improve the standard of this operation of workers. Safety and risk of the attack are in the operation of our time will not be presented, as long as you really guarantee their own operation is very standard, many of the dangerous question was originally does not exist.
 The use of Stamping Parts in the work of more and more places, we have to know how to properly use the Stamping Parts before the use of this product can guarantee the life of the product will not be any problems, the following we have to say in detail.
In the daily life, the application of Stamping Parts is very wide, the number of Stamping Parts processing plants are more and more, we as a professional Stamping Parts processing manufacturers, the following we come to introduce you to some precision Stamping Parts care knowledge, to let you Have a better understanding of this.
For the Stamping Parts of the mold, we have to use a long time after the grinding edge, and its grinding edge must also be demagnetized, not with the magnetic, otherwise it will occur blocking material phenomenon. But also for the stamping die in daily life also need to do nursing, lubrication role.
For the elastic parts of the Stamping Parts in the course of the use of the spring prone to damage, there will be broken and deformation of the phenomenon, so you need to replace the spring, and in the replacement process also need to pay attention to the spring specifications and models.
For the Stamping Parts of the mold need to fasten, you need to check whether the fastening parts loose, damaged phenomenon, if there is a phenomenon, you can find the same specifications of the parts to be replaced.
 Each item has its own design principles, that we all know Stamping Parts of the design principles of what is it? Below Riel for everyone to explain.
Stamping Parts processing design principles are as follows: the first design of the Stamping Parts must meet the use of products and technical performance, and also easy to assemble and repair; and then it must help improve the utilization of metal materials, reduce the variety and specifications of materials, as far as possible Reduce the consumption of materials.
In the case of allowing the use of low-cost materials, as far as possible so that parts do not waste and less waste; then in the design of the shape must be simple, reasonable structure, which will help simplify the mold structure, simplify the number of processes , That is, with the least, the most simple stamping process to complete the entire parts of the processing, and is conducive to stamping operation.
To facilitate the organization to achieve mechanization and automated production, in order to improve labor productivity. Design of the Stamping Parts, to ensure the normal use of the case, as far as possible to the dimensional accuracy of the grade and surface roughness level requirements lower, and is conducive to product interchange, reduce waste, to ensure product quality and stability. The design of the Stamping Parts should be conducive to the use of existing equipment as possible, process equipment and process to its processing, and is conducive to the extension of the die life.


Feedback
Weimi Hardware Tech. Company
Copyright © Dongguan Weimi Hardware Technology Co.,Ltd All rights reserved.