Product Categories
Contact Us

Weimi Hardware Tech. Company

Address: 1F, Jiufa Technology Park, Jinfu West Road, Liaobu Town, Dongguan, China 523407

Tel: 86-769-81123370

Fax: 86-769-81123371

Phone: 86-15814312928

Home > News > Content
Introduction Of The Chuck On The Machine
Weimi Hardware Tech. Company | Updated: Apr 05, 2016

Chuck is a mechanical device for clamping the workpiece on the machine. Using uniform activity on the chuck jaws radially moving, positioning and clamping of machine tool accessories. Chuck the Chuck body, activity claw and claw mechanism consists of 3 parts. Chuck diameter minimum to 65 mm, maximum up to 1500 mm, has a through hole in the Center, so that the workpiece or bar; the back short cylindrical or conical structure, either directly or through the flange is connected with the end of the spindle. Chuck is typically installed on lathe and grinding, cylindrical grinding machine used is also available with a variety of indexing device, used for milling machines and drill press.

Weimi Hardware Tech. Company
Copyright © Dongguan Weimi Hardware Technology Co.,Ltd All rights reserved.