Product Categories
Contact Us

Weimi Hardware Tech. Company

Address: 1F, Jiufa Technology Park, Jinfu West Road, Liaobu Town, Dongguan, China 523407

Tel: 86-769-81123370

Fax: 86-769-81123371

Phone: 86-15814312928

Home > News > Content
CNC Machining What Is The Milling And Reverse Milling Of CNC Machining
Weimi Hardware Tech. Company | Updated: May 17, 2017

First, CNC machining and milling and reverse milling is what

  CNC Machining The direction of rotation of the contact between the milling cutter and the workpiece is the same as that of the workpiece feed direction, and vice versa. There are always large or small gaps between the nuts and the leadscrews of the milling machine. With the change of the horizontal milling force, the table and the lead screw will move around. This periodic movement makes the work Taiwan movement is very smooth, easy to cause damage to the knife but the vertical milling of the milling force will force the workpiece to the table, the tooth and the machined surface sliding, friction phenomenon is small, to reduce the tooth wear, reduce the work hardening and Reduce the surface roughness are beneficial. Therefore, when the table screw and nut gap to adjust to less than 0.03mm or milling thin and long workpiece should be used when the milling. Reverse milling when the vertical component of the workpiece will be raised, the teeth and the machined surface sliding to increase the friction. But the horizontal force of the milling force to help the screw and nuts close, so that the table movement is relatively smooth, milling, forgings caused by tooth wear is also smaller. So the general use of reverse milling milling.

  CNC Machining Second, the NC machining milling and reverse milling characteristics


  When the milling is done, the cutting thickness of each knife is gradually changed from small to large. When the knife just contact with the workpiece, the cutting thickness is zero, only when the knife teeth in the former knife teeth left on the cutting surface over a distance, cutting thickness reaches a certain value, the tooth was really started cutting. The reverse milling makes the cutting thickness gradually change from large to small, and the sliding distance of the tooth on the cutting surface is also small. And when the milling, the knife teeth on the workpiece through the distance than the reverse milling short. Therefore, in the same cutting conditions, the use of reverse milling, the tool is easy to wear. When the milling is done, the teeth are cut from the surface of the workpiece each time, so it is not advisable to process the hardened parts. The average cutting thickness when milling is small and the cutting deformation is small, and the power consumption is less than that of the reverse milling.

  Reverse milling features:

  , CNC Machining Since the direction of the horizontal cutting force acting on the workpiece due to the milling cutter is opposite to that of the workpiece feed, the table screw and the nut can always be tightly fitted to one side of the thread. And the milling direction is not the same, because the direction of the horizontal milling force and the workpiece feed the same direction of movement, when the teeth on the workpiece when the force is large, due to the gap between the table and the gap between the nut, the table will produce channeling So that not only destroyed the smoothness of the cutting process, affecting the quality of the workpiece processing, and serious damage to the tool. As the friction between the teeth and the workpiece is large, so the machined surface of the cold phenomenon is more serious.

  Summary: milling and reverse milling have their own advantages and determine the specific use of which milling method or according to the workpiece is required to be what is required, the surface smoothness of the use of high-speed milling, and vice versa using reverse milling.

Weimi Hardware Tech. Company
Copyright © Dongguan Weimi Hardware Technology Co.,Ltd All rights reserved.